Masonite Pocket Door Frame With Track And Hardware - Just a couple months back I went over to repair a pocket door that was closing at a strange angle. It was the first time I'd ran into this sort of situation and was undoubtedly confused. I got a torch and started looking inside the pocket door frame. I had a hard time discovering the problem but when I did it was evident.
There is not any approach since it absolutely was at that back of the pocket door frame close to the framing to reach the screw.
It was the only thing I could think of and would require a wall patch that is simple and some paint to make the repair whole. This job took me about one hour to cut the hole and replaced the screw that had fallen from the pocket door track. I then use some quick setting drywall plaster plus some fiberglass drywall tape to correct the wall. This took another hour to complete the drywall correctly.
Some pocket door troubles are a little easier to repair than this one. Most pocket doors appeared to have troubles sliding and eventually are left shut, never to be properly used again. Painting the doors over and over again can actually increase the thickness of the door or the door to swell preventing it from opening correctly can be also caused by excessive moisture in the home over long periods of time.