Sound Proof Glass Pocket Doors - Just a couple of months ago I went over to fix a pocket door that was closing at a peculiar angle. This was the first time I'd ran into this kind of scenario and was undoubtedly lost. I got a flashlight and began looking within the pocket door frame. I had a hard time discovering the issue but when I did it was clear.
The bottom of the door would stick out about an inch and a half, as the pocket door was slipping shut it works flawlessly but when you went to open it. There is not any solution because it absolutely was at that very back of the pocket door frame near the framing itself, to reach the screw.
This was the only thing I could think of and would require a wall patch that is simple plus some paint to make the repair complete. This job took me about one hour to cut the hole and replaced the screw that had fallen from the pocket door path. I then use some fiberglass drywall tape and some fast setting drywall plaster to repair the wall. This took another hour to complete the drywall properly.
Some pocket door troubles are a little more easy to fix than this one. Most pocket doors appeared to have troubles sliding and eventually are left shut, never to be properly used again. Painting the doors over and over again can actually add to the thickness of the door or the doorway to swell keeping it from opening properly can be also caused by excessive moisture in the house over long periods of time.