Double Pocket Door Hardware Kit - Door for toilet secrecy is a good approach to gain precious space also. Setup of new, easy gliding, quiet toilet pocket door hardware is pretty easy for the DIY homeowner that is skilled, however door installer or an experienced handyman will craft excellent results while you go off and do what you are good at.
If you've never tackled a pocket door hardware refurbish endeavor, you should be aware of how called for the project is so you can determine if you really have the time, tools, and abilities needed to complete a pretty professional looking job.
Now you are ready to remove the flimsy distressed old rail hardware and replace it with the new roller track hardware. Replacing the rail often necessitates opening up the wall space - which means carefully cutting out a section of drywall to get to the hardware within the wall. You can install the new rail when the old rail is removed. But this would have been an excellent time to repair any issues that are alignment when the door was closed.
Settling is a common source of alignment door problems, and often times, the rail only is higher on one end of its own travel compared to the other. A straightforward piece of wood shim stuff is all that is needed to create the rail amount again. Using your level, estimate how you'll need, and monitor the shim in position. Then mount the rail with only a couple of screws - recheck for amount and complete setting every one of the screws when amount.