Johnson Hardware For Pocket Doors


Johnson Hardware For Pocket Doors johnson hardware 1500 series pocket door frame for doors up to 36 1000 X 1000

Johnson Hardware For Pocket Doors - Just a few months back I went over to repair a pocket door that was shutting at a bizarre angle. This was the very first time I'd ran into this sort of situation and was undoubtedly lost. I started looking inside the pocket door frame and got a flashlight. I had trouble discovering the issue but when I did it was apparent.

There is no approach to attain the screw as it was at that back of the pocket door frame close to the framing.

This was the sole thing I really could think of and would require an easy wall patch and a few paint to make the repair whole. This job took me about one hour to cut the hole and replaced the screw that had fallen out from the pocket door track. I then use some fast setting drywall plaster plus some fiberglass drywall tape to repair the wall. This took another hour to complete the drywall properly.

Some pocket door issues are a little easier to repair than this one. Most pocket doors seemed to have issues sliding and eventually are left closed, never to be utilized again. Painting the doors over and over again can actually increase the depth of the door or the door to swell preventing it from opening properly can be also caused by excessive moisture in the house over long amounts of time.