Pocket Door Wrench Rona - Just a few months ago I went over to fix a pocket door that was closing in a bizarre angle. This was the very first time I had ran into this kind of situation and was definitely confused. I started looking within the pocket door frame and got a torch. I had trouble discovering the problem but when I did it was noticeable.
The base of the door would stick out about an inch and a half as the pocket door was slipping shut it would work flawlessly but when you went to open it. There was not any way since it absolutely was at that back of the pocket door frame near the framing, to attain the screw.
To be able to fix the pocket door trouble, I had been going to need to remove a great sized area of the plastered wall in the upper right-hand corner of the pocket door frame. This was the sole thing I would require a wall patch that is simple and could think of plus some paint to make the repair whole. This job took me about one hour to cut the hole and replaced the screw that had fallen from the pocket door track. I then use some fiberglass drywall tape and some fast setting drywall plaster to repair the wall. This took another hour to finish the drywall correctly.
Some pocket door problems are a little more easy to fix than this one. Most pocket doors appeared to have problems falling and eventually are left shut, never to be utilized again. Painting the doors over and over again can in fact increase the thickness of the door or the door to swell preventing it from opening correctly can be also caused by excessive moisture in the home over long amounts of time.
Tags: #pocket door wrench rona