Pocket Doors Hardware Kit - Just a couple of months back I went over to repair a pocket door that was shutting at a peculiar angle. This was the very first time I'd ran into this kind of situation and was definitely lost. I got a torch and began looking inside the pocket door frame. I had trouble discovering the issue but when I did it was noticeable.
There is not any solution to reach the screw because it absolutely was at that very back of the pocket door frame close to the framing itself.
To be able to correct the pocket door trouble, I was going to have to remove a great sized area of the plastered wall at the top right hand corner of the pocket door frame. This was the sole thing I would require a straightforward wall patch and could think of plus some paint to make the repair whole. This job took me to cut the hole and replaced the screw that had fallen out from the pocket door path. I then use some quick setting drywall plaster plus some fiberglass drywall tape to fix the wall. This took another hour to complete the drywall properly.
Some pocket door problems are a little more easy to repair than this one. Most pocket doors seemed to have problems sliding and eventually are left shut, never to be used again. Painting the doors over and over again can actually increase the thickness of the door or the door to swell keeping it from opening properly can be also caused by excessive moisture in the house over long amounts of time.