Locking Pocket Door Hardware - Just a couple months back I went over to fix a pocket door that was closing at a peculiar angle. This was the very first time I'd ran into this type of situation and was undoubtedly lost. I began looking within the pocket door frame and got a torch. I had a hard time discovering the issue but when I did it was noticeable.
There clearly was no solution to attain the screw because it had been at that very back of the pocket door frame near the framing itself.
As a way to repair the pocket door difficulty, I would need to remove an excellent sized area of the plastered wall at the upper right hand corner of the pocket door frame. This was the only thing I would require a wall patch that is simple and really could think of and some paint to help make the repair whole. This job took me to cut the hole and replaced the screw that had fallen out from the pocket door path. I then use some fiberglass drywall tape and some quick setting drywall plaster to mend the wall. This took another hour to complete the drywall correctly.
Some pocket door problems are a little easier to fix than this one. Most pocket doors seemed to have problems falling and eventually are left closed, never to be utilized again. Painting the doors over and over again can in fact add to the depth of the door or excessive moisture in the house over long amounts of time can also cause the door to swell preventing it from opening correctly.