Contemporary Pocket Door Hardware - Just a couple months back I went over to fix a pocket door that was closing at a peculiar angle. This is the first time I had ran into this kind of scenario and was undoubtedly lost. I began looking inside the pocket door frame and got a flashlight. I had trouble discovering the issue but when I did it was evident.
The difficulty turned out to be as the door slid back into the framework the tracking would hang down at an angle in the weight of the doorway and the path was missing a screw in the back that was very. There was not any strategy as it had been at that back of the pocket door frame close to the framing itself to attain the screw.
This is the only real thing I could think of and would require a wall patch that is simple and a few paint to help make the repair whole. This job took me to cut the hole and replaced the screw that had fallen from the pocket door track. I then use some fast setting drywall plaster plus some fiberglass drywall tape to mend the wall. This took another hour in order to complete the drywall properly.
Some pocket door problems are a little easier to fix than this one. Most pocket doors seemed to have problems sliding and eventually are left closed, never to be utilized again. Painting the doors over and over again can in fact add to the thickness of the door or excessive moisture in the house over long amounts of time also can cause the doorway to swell preventing it from opening properly.