Pocket Doors With Frosted Glass - Just a few months back I went over to repair a pocket door that was shutting at a peculiar angle. This is the first time I had ran into this kind of scenario and was undoubtedly lost. I started looking within the pocket door frame and got a torch. I had a hard time finding the issue but when I did it was evident.
The base of the door would stick out about an inch and a half as the pocket door was slipping shut it works flawlessly but when you went to open it. There is no strategy since it absolutely was at that very back of the pocket door frame near the framing itself, to reach the screw.
This is the only real thing I really could think of and would require a simple wall patch and a few paint to make the repair complete. This job took me about one hour to cut the hole and replaced the screw that had fallen from the pocket door track. I then use some fiberglass drywall tape and some quick setting drywall plaster to repair the wall. This took another hour to complete the drywall properly.
Some pocket door troubles are a little easier to repair than this one. Most pocket doors seemed to have troubles sliding and eventually are left shut, never to be properly used again. Painting the doors over and over again can actually increase the thickness of the door or excessive moisture in the house over long periods of time may also make the doorway to swell preventing it from opening properly.