Pocket Door Hinge Set - Just a couple months ago I went over to repair a pocket door that was closing in a strange angle. This is the very first time I'd ran into this type of scenario and was definitely lost. I began looking within the pocket door frame and got a flashlight. I had a hard time discovering the problem but when I did it was noticeable.
As the pocket door was sliding shut it works flawlessly but when you went to open it the base of the door would stick out about an inch and a half. The problem turned out to be as the door slid back to the frame the tracking would hang down at an angle in the weight of the door and the course was missing a screw in the back that was very. There clearly was no approach because it absolutely was at that back of the pocket door frame near the framing, to attain the screw.
As a way to repair the pocket door problem, I was really going to have to remove a great sized area of the plastered wall in the top right hand corner of the pocket door frame. This is the only real thing I would require a wall patch that is simple and could think of plus some paint to really make the repair complete. This job took me about one hour to cut the hole and replaced the screw that had fallen out of the pocket door track. I then use some fast setting drywall plaster and some fiberglass drywall tape to repair the wall. This took another hour to finish the drywall correctly.
Some pocket door problems are a little more easy to repair than this one. Most pocket doors appeared to have problems falling and eventually are left shut, never to be utilized again. Painting the doors over and over again can in fact increase the thickness of the door or the door to swell keeping it from opening correctly can be also caused by excessive moisture in the house over long amounts of time.
Tags: #pocket door hinge set