Emtek Pocket Door Hardware Template - Door for bathroom seclusion is a good way to gain precious space too.
In the event you have never handled a pocket door hardware refurbish project, you should be aware of how involved the undertaking is so you are able to choose if you have the time, tools, and abilities needed to accomplish a reasonably professional looking job. You need to get rid of the door stops - these will be the strips of wood that help contain the doorway and help stop it from running its rail off. A utility knife is for cutting on the paint so pieces remove helpful, are usable afterwards.
Now you are ready to get rid of the flimsy old that is distressed rail hardware and replace it using the new roller track hardware. Replacing the rail regularly requires opening up the wall space - that means carefully cutting out a segment of drywall to get to the hardware inside the wall. After the rail that is old is removed, you can install the new rail. But this would be an excellent time when the door was shut to repair any problems that are alignment.
Settling is a familiar source of door issues that are alignment, and often times, the rail just is higher on one end of its own journey compared to other. A simple piece of wood shim stuff is all that is necessary to make the rail degree again. Making use of your level, estimate how you track the shim set up, and will require. Then mount the rail with only a couple screws - recheck for degree and finish placing all the screws when degree.