Door Pockets For Trucks - Just a couple of months ago I went over to fix a pocket door that was closing at a strange angle. It was the first time I had ran into this type of scenario and was definitely confused. I got a flashlight and started looking within the pocket door frame. I had trouble finding the problem but when I did it was evident.
The base of the door would stick out about an inch and a half as the pocket door was sliding shut it works flawlessly but when you went to open it. The issue turned out to be as the door slid back to the frame the tracking would hang down at an angle in the weight of the door and the course was missing a screw in the back that was very. There clearly was no method as it had been at that back of the pocket door frame close to the framing, to achieve the screw.
It was the only real thing I would require a simple wall patch and really could think of and some paint to help make the repair whole. This job took me about one hour to cut the hole and replaced the screw that had fallen out of the pocket door path. Then I use some fiberglass drywall tape and some quick setting drywall plaster to fix the wall. This took another hour in order to complete the drywall properly.
Some pocket door troubles are a little easier to fix than this one. Most pocket doors seemed to have troubles falling and eventually are left shut, never to be used again. Painting the doors over and over again can actually add to the depth of the door or the door to swell keeping it from opening properly can be also caused by excessive moisture in the house over long amounts of time.