Hanging Pocket Door Rollers - Just a few months ago I went over to repair a pocket door that was shutting in a weird angle. This was the first time I'd ran into this type of situation and was definitely confused. I began looking inside the pocket door frame and got a torch. I had trouble discovering the problem but when I did it was noticeable.
As the pocket door was sliding shut it would work perfectly but when you went to open it the bottom of the door would stick out about an inch and a half. There was no solution because it absolutely was at that back of the pocket door frame close to the framing itself, to attain the screw.
This was the only real thing I could think of and would require a wall patch that is simple and some paint to help make the repair complete. This job took me about one hour to cut the hole and replaced the screw that had fallen out of the pocket door track. I then use some fiberglass drywall tape and some fast setting drywall plaster to correct the wall. This took another hour to complete the drywall properly.
Some pocket door difficulties are a little more easy to repair than this one. Most pocket doors appeared to have difficulties sliding and eventually are left shut, never to be utilized again. Painting the doors over and over again can in fact increase the thickness of the door or the doorway to swell preventing it from opening properly can be also caused by excessive moisture in the home over long periods of time.