Bathroom Pocket Door Size - Nobody complains about having a lot of space in the master bedroom or bathroom. Door for bathroom privacy is a good approach to gain prized space too.
You should be aware of how involved the project is so you are able to decide if you really have the time, tools, and abilities needed to accomplish a reasonably professional looking job in case you have never tackled a pocket door hardware refurbish undertaking. First, you have to take out the door stops - these would be the strips of wood that help comprise the door and help prevent it from running off its railing. A utility knife is for cutting on the paint so sections remove, useful, are useable later on.
Now you are prepared to eliminate the worn old railing hardware that is flimsy and replace it with the newest roller track hardware. Replacing the railing often requires opening up the wall space - that means carefully cutting a segment of drywall out to get to the hardware within the wall. When the old railing is removed, you'll be able to install the new railing. But this would be a good time when the door was shut to fix any problems that are alignment.
Settling is a common cause of door difficulties that are alignment, and often times, the railing just is higher on one end of its travel as opposed to other. A simple piece of wood shim material is all which is necessary to create the railing amount again. Using your level, estimate how thick a shim you track the shim in place, and will be needing. Then mount the railing with only a couple of screws - recheck for amount when amount, and complete placing all of the screws.