Pocket Doors Frosted Glass Panels - Just a couple months ago I went over to fix a pocket door that was shutting at a peculiar angle. It was the very first time I'd ran into this kind of situation and was undoubtedly confused. I started looking within the pocket door frame and got a torch. I had a hard time discovering the issue but when I did it was noticeable.
The bottom of the door would stick out about an inch and a half passed the door jam, as the pocket door was slipping closed it works perfectly but when you went to open it. The problem turned out to be the track was missing a screw in the rear so that as the door slid back to the framework the tracking would hang down at an angle in the weight of the doorway. There was not any approach because it had been at that back of the pocket door frame near the framing itself to attain the screw.
It was the sole thing I would require a wall patch that is simple and could think of plus some paint to really make the repair whole. This job took me to cut the hole and replaced the screw that had fallen from the pocket door track. Then I use some fiberglass drywall tape and some fast setting drywall plaster to fix the wall. This took another hour in order to complete the drywall correctly.
Some pocket door troubles are a little more easy to fix than this one. Most pocket doors seemed to have troubles sliding and eventually are left closed, never to be utilized again. Painting the doors over and over again can actually add to the thickness of the door or the doorway to swell preventing it from opening correctly can be also caused by excessive moisture in the house over long periods of time.